3.11.7 HOT ROLLER STRIPPERS
1. Fusing unit top cover ( x 1). (!3.11.2)
2. Raise the upper exit guide plate assembly and rotate it clockwise 160 degrees,
disconnect the pegs from the cut outs on both sides, then remove the unit.
(!3.11.3)
3. Upper exit guide plate [A] ( x 2).
4. Spring [B].
5. Springs [C], [D] hooked to the sides of the stripper.
6. Shaft [E].
SM
CÓPIA NÃO CONTROLADA
[D]
3-111
CÓPIA NÃO CONTROLADA
FUSING UNIT
[B]
[E]
[C]
[A]
B070R517.WMF
B070/B071