Gestetner B070 Service Manual page 435

Rev. 6/2004
SP Number/Name
6107 Finisher Free Run
001 Staple Mode
002 Shift Mode
003 Back to the Home Position
004 With Jogger Unit
6113 Punch Hole Position Adjustment
001 2 Holes
002 3 Holes
6116 Sheet Conversion (Thick Paper)
6117 Finisher Input Check
001 INPUT1
002 INPUT2
003 INPUT3
004 INPUT4
005 INPUT5
006 INPUT6
6118 Finisher Output Check
6119 Punch Function Enabled (Thick Paper)
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
The finisher simulates a finisher free run for
stapling A4 LEF.
[0~1 / 0 / 1]
0: Stop
1: Start
The finisher simulates a free run for
stapling and tray shifting.
[0~1 / 0 / 1]
0: Stop
1: Start
Sets the machine in standby mode for
shipping.
[0~1 / 0 / 1]
0: Stop
1: Start
The finisher simulates a shift mode free run
with the optional jogger unit.
[0~1 / 0 / 1]
0: Stop
1: Start
Adjusts the punch hole position in the sub-
scan direction for the punch unit.
[-7.5~+7.5 / 0 / 0.5 mm]
Use the "
.
A larger value shifts the punch holes away
from the edge of the paper, a smaller value
toward the edge.
Divide the normal limit for stapling by this
number to determine the staple limit
number for thick paper mode.
[1~3 / 3 / 1]
Displays the signals received from sensors
and switches of the finisher. ( 5.4.3)
Turn on the electrical components of the
finisher individually for test purposes.
( 5.5.3)
Determines whether punch mode is
enabled in thick paper mode.
[0~1 / 0 / 1] 0: Disabled 1: Enabled
5-53
CÓPIA NÃO CONTROLADA
Function/[Setting]
•
/*" key to toggle between + and –
B070/B071