Gestetner B070 Service Manual page 481

Parts List for PM Yield Indicator
On this screen, only the parts selected in the "All PM parts list" screen are
displayed. Normally, the PM parts counters should be checked on this screen.
If the current counter exceeds the target yield, there is a * mark in the "Exceed"
column.
Each counter can also be cleared on this screen. To clear all counters on this
screen at once, see 'Counter Clear for Parts Exceeding Target Yield' on the next
page.
Parts Exceeding Target Yield
Only the parts whose counters are exceeding the target yield are displayed. If none
of the PM counters is exceeding the target yield, this item cannot be selected from
the parts replacement menu.
SM
CÓPIA NÃO CONTROLADA
5-99
CÓPIA NÃO CONTROLADA
PM COUNTER
A294M015.PCX
B070/B071