LASER UNIT
3.6.4 POLYGON MIRROR MOTOR
NOTE: To avoid damaging the polygon motor, switch the machine off and wait 3
minutes to allow the motor to stop rotating before removing it.
1. Turn off the main power switch and unplug the machine.
2. Exposure glass ( 3.5.1)
3. Lens block cover and lens block. ( 3.6.2)
NOTE: You do not need to remove the lens block completely. Lift it gently and
move it to the right.
4. LD cover [A] (
5. Polygon mirror motor [B] (
NOTE: 1) When reinstalling, make sure that the polygon mirror opening faces
2) Never touch the glass surface of the polygon mirror motor with bare
⇒
7. After reassembly, do the scanner and printer copy adjustments. ( 3.17)
B070/B071
CÓPIA NÃO CONTROLADA
[A]
x 4,
x 1).
x 3,
the right.
hands.
CÓPIA NÃO CONTROLADA
x 1).
3-38
Rev. 10/2003
[B]
B070R101.WMF
SM