Gestetner B070 Service Manual page 137

Rev. 01/2004
⇒
4. Attach the upper tray heater kit to
the middle rail for the tandem tray
with 2 screws.
5. Install the middle rail and upper tray heater kit into the main frame.
Front Side: mounted by 3 screws
6. Route the harness for upper and
lower heaters as shown.
Note: Clamp the harness for the
upper heater at 2 points.
SM
CÓPIA NÃO CONTROLADA
Rear Side: mounted by 2 screws
1-103
CÓPIA NÃO CONTROLADA
TRAY HEATER KITS
Insert the tab of the
heat sink into here!!
B070/B071