Gestetner B070 Service Manual page 260

FUSING UNIT
[B]:
Do not remove
B070R503.WMF
6. On both sides remove the outer pairs of M5 pan head screws [A]. ( x 4)
NOTE: On both sides of the fusing unit, do not remove the inner pair of M4
bind screws [B].
7. Hot Roller unit [C].
NOTE: When re-installing, secure the screws [A] in the following order: rear-left,
front-right, rear-right, front-left.
8. Lower exit guide plate assembly [D] ( x 2,  x 1, clamp x 1).
NOTE: Avoid touching the surface of the pressure roller.
9. Pressure roller assembly [E].
B070/B071
CÓPIA NÃO CONTROLADA
[A]
[C]
3-102
CÓPIA NÃO CONTROLADA
[D]
[E]
SM