Electrical Component Descriptions - Gestetner B070 Service Manual

7.2.1 ELECTRICAL COMPONENT DESCRIPTIONS

Symbol Name
Clutches
MC8 Transport
MC9 Paper Feed
MC10 Grip
Motors
M5 Tray
M6 Tray Lift
Sensors
S23 Paper Feed
S24 Lift
S25 Lower Limit
S26 Paper End
S27 Paper Length
S28 Paper Height 1
S29 Paper Height 2
Solenoids
SOL7 Pick-up
Switches
SW5 Tray Lift
SW6 Paper Width
The numbering for the components does not start at 1 because the point-to-point
diagram for the bypass tray is included on the diagram for the LCT. For the
purpose of component numbering, they are considered together as one unit.
SM
CÓPIA NÃO CONTROLADA
OVERALL MACHINE INFROMATION
Drives the transport rollers in the bypass tray.
Drives the paper feed roller in the bypass tray.
Drives the grip clutch in the bypass tray.
Drives all rollers in the bypass tray.
Lifts and lowers the tray.
Detects the copy paper coming to the paper feed
roller and checks for misfeeds.
Detects when the paper in the bypass tray is at the
correct paper feed height.
Detects when the tray is at its lowest possible
position.
Informs the copier when the paper in the bypass tray
has run out.
Used with the paper width switch to determine paper
size. This sensor is activated when paper is set for
short edge feed. For example, when the paper width
switch detects A4 width and this sensor is off, the
machine determines A4 is set for long edge feed.
When A4 width is detected and the paper length
sensor is on, then the machine determines that A3 is
loaded for short edge feed.
Detects the paper height in the bypass tray.
Detects the paper height in the bypass tray.
Controls up-down movement of the pick-up roller in
the bypass tray.
Switches the tray lift motor on and off to lift and
lower the bottom plate of the tray. This switch must
be pressed to start paper feed.
A slide switch connected to the side fences. When
the side fences are moved to match the paper width,
four feelers inside the paper size switch slide along
wiring patterns of a terminal plate. The wire pattern
detected determines the paper width.
25
CÓPIA NÃO CONTROLADA
Function
B512