Installation
CAUTION
Before you begin this procedure, switch the machine off and disconnect
the power plug from the power source.
1. Remove the controller box cover ( x 9).
2. Hold the 256 MB memory DIMM [A] with the slot [B] in the edge connector on
the left, then insert the DIMM into the slot [C] above the other memory DIMM.
NOTE: To remove the memory DIMM, spread the spring-loaded clips on either
end of the DIMM.
3. Re-attach the controller box cover.
SM
CÓPIA NÃO CONTROLADA
INSTALLATION OF MFP CONTROLLER OPTIONS
[B]
1-77
CÓPIA NÃO CONTROLADA
[C]
[A]
B580I102 WMF
B070/B071