Gestetner B070 Service Manual page 527

Rev. 06/2003
Number
S39 Duplex Inverter Sensor
S40 Duplex Entrance Sensor
S41 Duplex Transport Sensor 1
S42 Duplex Transport Sensor 2
S43 Duplex Transport Sensor 3
S44 Duplex Jogger HP Sensor
S45 LCT Relay Sensor
S46 Relay Sensor
S47 Registration Sensor
S48 Guide Plate Position Sensor
S49 Web End Sensor
S50 Fusing Exit Sensor
S51 Exit Sensor
Toner Suction Motor Rotation
S52
Sensor
S53 Toner Suction Bottle Set Sensor
⇒
Solenoids
SOL01 Transfer Belt Lift
SOL02 1st Pick-up Solenoid
SOL03 1st Pick-up Solenoid
SOL04 3rd Pick-up Solenoid
SOL05 1st Separation Roller Solenoid
SOL06 2nd Separation Roller Solenoid
SOL07 3rd Separation Roller Solenoid
SOL08 Front Side Fence
SOL09 Rear Side Fence
SOL10 Tandem Tray Connect
SM
CÓPIA NÃO CONTROLADA
ELECTRICAL COMPONENT DESCRIPTIONS
Name
Detects when to turn the inverter gate and
exit gate solenoids off and checks for
misfeeds.
Detects the leading and trailing edges of the
paper to determine the reverse roller
solenoid on or off timing.
Detects the position of paper in the duplex
unit.
Detects the position of paper in the duplex
unit.
Detects the position of paper in the duplex
unit.
Detects whether the duplex jogger fences
are at the home position.
Detects misfeeds.
Detects misfeeds.
Detects misfeeds and controls registration
motor on/off timing.
Detects whether the registration guide plate
is open or closed.
Detects when the oil supply/cleaning web
has been used up.
Detects misfeeds.
Detects misfeeds.
Detects whether the development unit toner
suction motor is rotating.
Detects whether the development unit waste
toner bottle is set.
Controls the up-down movement of the
transfer belt unit.
Controls the up-down movement of the pick-
up roller in tray 1.
Controls the up-down movement of the pick-
up roller in tray 2.
Controls the up-down movement of the pick-
up roller in tray 3.
Controls the up-down movement of the
separation roller in tray 1.
Controls the up-down movement of the
separation roller in tray 2.
Controls the up-down movement of the
separation roller in tray 3.
Opens and closes the front side fence in the
tandem tray.
Opens and closes the rear side fence in the
tandem tray.
Connects/disconnects the two halves of the
tandem tray.
6-11
CÓPIA NÃO CONTROLADA
Description
B070/B071