Hot Roller - Gestetner B070 Service Manual

FUSING UNIT

3.11.4 HOT ROLLER

[D]
[A]
B070R507.WMF
1. Hot roller unit. (!3.11.3 Steps 1 to 6)
2. Fusing entrance guide plate [A] ( x 2).
3. Two screws [B] securing the harness terminal bracket, and unhook the bracket.
NOTE: Unhook the thermistor cable [C] and thermostat cable [D] to avoid
damaging them.
4. Disconnect the fusing lamp cables [E] from the terminals at the rear ( x 3).
5. Disconnect the fusing lamp connectors [F] at the front side ( x 3).
NOTE: At the front, there is no color coding for the cables. They can be
connected in any order.
B070/B071
CÓPIA NÃO CONTROLADA
[C]
[B]
3-104
CÓPIA NÃO CONTROLADA
[F]
[E]
B070R508.WMF
SM