Gestetner B070 Service Manual page 425

Rev. 06/2004
SP Number/Name
5839 010 Unique ID
011 Logout
012 Login
013 Login MAX
5840 IEEE 802.11b.
004 SSID
006 Channel MAX
007 Channel MIN
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Lists the ID (Node_Unique_ID) assigned to
the device by the system administrator.
[0~1/1/1]
0: Does not list the Node_Unique_ID
1: The Node_Unique_ID assigned by the
Handles the login request of the login
initiator for SBP-2. (1-bit)
[0~1/1/1]
0: Disable (refuse login)
1: Enable (force logout)
Enables or disables the exclusive login
feature (SBP-2 related).
[0~1/0/1]
0: Disables. The exclusive login (LOGIN
1: Enables. Exclusive login is in effect.
Sets the maximum number of logins from
the initiator (6-bits)
[0~63/8/1]
0: Reserved
63: Reserved
Enters an unique ID (up to 32 characters
long) to identify the device when it is
operating in an area with another wireless
LAN network.
Sets the maximum range of the bandwidth
for the wireless LAN. This bandwidth
setting varies for different countries.
NA: [1~11/11/1]
EUR/A: [1~13/13/1]
Sets the minimum range of the bandwidth
for the wireless LAN. This bandwidth
setting varies for different countries.
NA: [1~11/1/1]
EUR/A: [1~13/1/1]
5-43
CÓPIA NÃO CONTROLADA
Function/[Setting]
assigned by the system administrator.
Instead, the Source_ ID of the GASP
header in the ARP is used.
system administrator is used, and the
Source_ID of the GASP header in the
ARP is ignored. Also, when the serial
bus is reset, extra bus transactions are
opened for the enumeration.
Initiator retry during login
Login refusal on arrival of login request
(standard operation)
Initiator retry during login
Login refusal on arrival of login request,
and the initiator forces the login.
ORB exclusive it) is ignored.
B070/B071