Gestetner B070 Service Manual page 398

SERVICE PROGRAM MODE TABLES
SP
⇒
2301 003
004
005
006
007
008
009
010
011
012
2506 Cleaning Interval-Multiple Copy
001
002
⇒
2602 PTL Settings
001
002
B070/B071
CÓPIA NÃO CONTROLADA
Number/Name
Transparencies
Translucent Sheets
2nd Copy Side
Between Papers
1st Copy Side (Low Speed)
Thick Paper (Low Speed)
Transparencies (Low Speed)
Translucent Sheets (Low Speed)
2nd Copy Side (Low Speed)
Between Papers (Low Speed)
On / Off
Interval
Front – On/Off Setting
Front – Off Timing Adj.
CÓPIA NÃO CONTROLADA
Function/[Setting]
[10~200 / 140 / 1 µA]
B070: [10~200 / 100/ 1 µA]
B071: [10~200 / 110 / 1 µA]
B070: [10~200 / 100/ 1 µA]
B071: [10~200 / 110 / 1 µA]
[10~200 / 20 / 1 µA]
[10~200 / 80 / 1 µA]
[10~200 / 80 / 1 µA]
[10~200 / 90 / 1 µA]
[10~200 / 80 / 1 µA]
[10~200 / 80 / 1 µA]
[10~200 / 20 / 1 µA]
Selects whether multiple jobs are stopped
at regular intervals in order to 1) reverse
the drum to clean the cleaning blade
edge, or 2) create an ID sensor pattern to
correct toner density control. This SP
switches this feature on and off. SP2506
002 sets the interval.
[0~1 / 1/1]
0: OFF, 1: ON
Use if the drum gets dirty or images get
too pale or too dark during long copy
jobs.
Selects the interval at which multi copy
jobs are stopped for blade cleaning.
[1~100 / 30/ 1 min]
Reduce the value if a large amount of
paper dust is causing black lines on the
copy.
Switches the PTL on and off for the front
side of the paper passing through the
fusing unit at normal speed.
Note: When feeding thick paper or OHP
transparencies, this setting is always off.
[0~1/0/1]
0: Off
1: On
PTL timing can be adjusted with
SP2602 002.
This SP adjusts the length of the space
from the leading edge where the PTL
quenching is applied to the front side at
normal speed. For example, if you set +5,
5 mm from the leading edge will be
quenched.
[-5~10/2/0.1 mm]
5-16
Rev. 06/2004
SM