Show Arp-Learning Vlan Ports - Extreme Networks ExtremeWare Command Reference Manual

show arp-learning vlan ports

show arp-learning vlan <vlan name> ports <portlist>
From ExtremeWare 7.7, this command is modified to:
show ip-security arp learning vlan <vlan name> ports <portlist>
Description
Displays the ARP-learning configuration for a port in the given vlan.
Syntax Description
vlan name
portlist
Default
By default, ARP learning is enabled.
Usage Guidelines
The first column of the show output displays the configuration of the VLAN and port. The second
column of the output display the ARP learning configuration on that port.
Example
The following example displays the arp-learning configuration on the VLAN called vlan1:
* Summit400-48t:55 #show arp-learning vlan1 ports all
The command generates output similar to the following:
(Vlan,Port)-Arp Learning
--------------------------
[vlan1
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
This command is modifed in ExtremeWare 7.7.0. The new command is:
show ip-security arp learning vlan <vlan name> ports <portlist>
Both the commands can be used in ExtremeWare 7.7.0.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies the vlan to which the rule applies.
Specifies the ports to which the rule applies.
all Specifies that the rule is applied to all ports.
,3 ]-Enabled
(Port)-Arp learning
------------------------
[3 ]-Enabled
show arp-learning vlan ports
1067