Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.61
clear / set spantree spanguardlock
Use either of these commands to unlock one or more ports locked by the Spanning Tree span guard
function. When span guard is enabled, it locks ports that receive BPDUs when those ports have been
defined as edge (user) ports (as described in
clear spantree spanguardlock port-string
set spantree spanguardlock port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to unlock port fe.1.16:
Matrix(rw)->
6-74 Matrix DFE-Platinum and Diamond Series Configuration Guide
Section
Specifies port(s) to unlock. For a detailed description of
possible port-string values, refer to
clear spantree spanguardlock fe.1.16
6.2.2.20).
Section
4.1.1.