Enterasys Matrix 2G4072-52 Configuration Manual page 202

Discovery Protocols Command Set
Enterasys Discovery Protocol
Table 3-1 provides an explanation of the command output.
Table 3-1 show cdp Output Details
Output
CDP Global Status
CDP Versions
Supported
CDP Hold Time
CDP Authentication
Code
CDP Transmit
Frequency
Port
Status
3-6 Matrix DFE-Platinum and Diamond Series Configuration Guide
What It Displays...
Whether CDP is globally auto-enabled, enabled or disabled. The default
state of auto-enabled can be reset with the set cdp state command. For
details, refer to Section
CDP version number(s) supported by the device.
Minimum time interval (in seconds) at which CDP configuration
messages can be set. The default of 180 seconds can be reset with the
set cdp hold-time command. For details, refer to
Authentication code for CDP discovery protocol. The default of
00-00-00-00-00-00-00-00 can be reset using the set cdp auth
command. For details, refer to
Frequency (in seconds) at which CDP messages can be transmitted. The
default of 60 seconds can be reset with the set cdp interval command.
For details, refer to
Port designation. For a detailed description of possible port-string
values, refer to Section
Whether CDP is enabled, disabled or auto-enabled on the port.
3.2.2.2.
Section 3.2.2.3.
Section 3.2.2.4.
4.1.1.
Section 3.2.2.5.