Show Rmon Stats - Enterasys Matrix 2G4072-52 Configuration Manual

Logging And Network Management Command Set
Configuring RMON
11.2.4.1

show rmon stats

Use this command to display RMON statistics measured for one or more ports.
show rmon stats [port-string] [wide] [bysize]
Syntax Description
port-string
wide
bysize
Command Defaults
If port-string is not specified, RMON stats will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON statistics for Fast Ethernet port 20 in module 1:
Matrix(rw)->
Port: fe.1.20
--------------------
Index
Owner
Data Source
Drop Events
Collisions
Jabbers
Broadcast Pkts = 0
Multicast Pkts = 0
CRC Errors
Undersize Pkts = 0
Oversize Pkts
Fragments
11-48 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays RMON statistics for specific port(s).
For a detailed description of possible port-string values,
refer to Section
(Optional) Display most important stats, one line per entry.
(Optional) Display counters by packet length.
show rmon stats fe.1.20
= 1011
= monitor
= 1.3.6.1.2.1.2.2.1.1.51021
= 0
= 0
= 0
= 0
= 0
= 0
4.1.1.
Packets
Octets
0 - 64 Octets = 0
65 - 127 Octets = 0
128 - 255 Octets = 0
256 - 511 Octets = 0
512 - 1023 Octets = 0
1024 - 1518 Octets = 0
= 0
= 0