Set Rmon Matrix Status - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.4.25 set rmon matrix status

Use this command to enable an RMON matrix entry.
set rmon matrix status index enable
Syntax Description
index
enable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable RMON matrix entry 1:
Matrix(rw)->
Specifies an index number for this entry. Maximum
number of entries is 2. Maximum value is 65535.
Enables or disables this matrix entry.
set rmon matrix status 1 enable
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring RMON
11-83