General Configuration Command Set
Setting Basic Device Properties
2.2.3.5
set ip gratuitous-arp
Use this command to control the gratuitous ARP processing behavior.
set ip gratuitous-arp [request] [reply] [both]]
Syntax Description
request
reply
both
Command Defaults
Disabled by default
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example sets both gratuitous ARP requests and replies:
Matrix(rw)->set ip gratuitous-arp both
2-48 Matrix DFE-Platinum and Diamond Series Configuration Guide
Process only gratuitous ARP requests.
Process only gratuitous ARP replies.
Process both requests and replies.