Clear Lldp Port Network-Policy - Enterasys Matrix 2G4072-52 Configuration Manual

3.2.4.24

clear lldp port network-policy

Use this command to return network policy for a set of applications on a port or range of ports to
default values.
clear lldp port network-policy {all | voice | voice-signaling | guest-voice |
guest-voice-signaling | softphone-voice | video-conferencing | streaming-video
| video-signaling} {[state ] [ tag ] [vid ] [cos ] [dscp ] } port-string
Syntax Description
all
voice
voice-signaling
guest-voice
guest-voice-signaling Command will be applied to the guest voice signaling
softphone-voice
video-conferencing
streaming-video
video-signaling
state
tag
vid
cos
Command will be applied to all applications.
Command will be applied to the voice application.
Command will be applied to the voice signaling
application.
Command will be applied to the guest voice application.
application.
Command will be applied to the softphone voice
application.
Command will be applied to the video conferencing
application.
Command will be applied to the streaming video
application.
Command will be applied to the video signaling
application.
(Optional) Clear the state of advertising the application
information being configured to disabled.
(Optional) Clear the tag value of the application being
configured to untagged.
(Optional) Clear the VLAN identifier for the port to the
default value of 1.
(Optional) Clear the Layer 2 priority to be used for the
application being configured to the default value of 0.
(A value of 0 represents use of the default priority as
defined in IEEE 802.1D.)
Matrix DFE-Platinum and Diamond Series Configuration Guide
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-61