Set Rmon Channel - Enterasys Matrix 2G4072-52 Configuration Manual

Logging And Network Management Command Set
Configuring RMON

11.2.4.28 set rmon channel

Use this command to configure an RMON channel entry.
set rmon channel index port-string [accept {matched | failed}] [control {on |
off}] [onevent onevent] [offevent offevent] [event event] [estatus {ready | fired |
always}] [description description] [owner owner]
Syntax Description
index
port-string
accept matched |
failed
control on | off
onevent onevent
offevent offevent
event event
estatus ready |
fired | always
description
description
owner
11-86 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies an index number for this entry. An entry will
automatically be created if an unused index number is
chosen. Maximum number of entries is 2. Maximum
value is 65535.
Specifies the port on which traffic will be monitored.
(Optional) Specifies the action of the filters on this
channel as:
•
matched - Packets will be accepted on filter matches
•
failed - Packets will be accepted if they fail a match
(Optional) Enables or disables control of the flow of data
through the channel.
(Optional) Specifies the index of the RMON event that
will turn this channel on.
(Optional) Specifies the index of the RMON event that
will turn this channel off.
(Optional) Specifies the event to be triggered when the
channel is on and a packet is accepted
(Optional) Specifies the status of the event as:
•
ready - A single event may be generated.
•
fired - No additional events may be generated.
•
always - An event will be generated for every match.
(Optional) Specifies a description for this channel.
(Optional) Specifies the name of the entity that
configured this entry.