Enterasys Matrix 2G4072-52 Configuration Manual page 759

Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to:
•
globally enable rate limiting
•
configure rate limiting for inbound traffic on port fe.2.1, index 1, priority 5, to a threshold of 125
KBps:
Matrix(rw)->set port ratelimit enable
Matrix(rw)->set port ratelimit fe.2.1 5 125 enable inbound
Port Priority and Rate Limiting Configuration Command Set
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring Port Traffic Rate Limiting
9-19