Show Rmon Event - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.4.11 show rmon event

Use this command to display RMON event entry properties.
show rmon event [index]
Syntax Description
index
Command Defaults
If index is not specified, information about all RMON entries will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON event entry 3:
Matrix(rw)->show rmon event 3
Index 3
----------------
Owner
Status
Description
Type
Community
Last Time Sent = 0 days 0 hours 0 minutes 37 seconds
Table 11-8
Table 11-8 show rmon event Output Details
Output
Index
Owner
Status
(Optional) Displays RMON properties and log entries for a
specific entry index ID.
= Manager
= valid
= STP Topology change
= log-and-trap
= public
provides an explanation of the command output.
What It Displays...
Index number for this event entry.
Text string identifying who configured this entry.
Whether this event entry is enabled (valid) or disabled.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring RMON
11-63