Set Rmon Stats - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.4.2

set rmon stats

Use this command to configure an RMON statistics entry.
set rmon stats index port-string [owner]
Syntax Description
index
port-string
owner
Command Defaults
If owner is not specified, monitor will be applied.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to configure RMON statistics entry 2 for fe.1.20:
Matrix(rw)->
Specifies an index for this statistics entry.
Specifies port(s) to which this entry will be assigned. For a
detailed description of possible port-string values, refer to
Section 4.1.1.
(Optional) Assigns an owner for this entry.
set rmon stats 2 fe.1.20
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring RMON
11-51