Enterasys Matrix 2G4072-52 Configuration Manual page 248

Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example configures the management address, MED capability, MED network policy, and
MED location identification TLVs to be sent in LLDPDUs by port ge.1.1.
Matrix(rw)->set lldp port tx-tlv mgmt-addr med-cap med-pol med-loc ge.1.1
3-52 Matrix DFE-Platinum and Diamond Series Configuration Guide