Enterasys Matrix 2G4072-52 Configuration Manual page 981

Example
This example shows how to use the show ip arp command:
Matrix>Router1#show ip arp
Protocol Address
------------------------------------------------------------------------------
Internet 134.141.235.251
Internet 134.141.235.165
Internet 134.141.235.167
Matrix>Router1#show ip arp 134.141.235.165
Protocol Address
------------------------------------------------------------------------------
Internet 134.141.235.165
Matrix>Router1#show ip arp vlan 2
Protocol Address
------------------------------------------------------------------------------
Internet 134.141.235.251
Table 12-3
Table 12-3 show ip arp Output Details
Output
Protocol
Address
Age (min)
Hardware Addr
Type
Interface
Age (min) Hardware Addr
0
-
4
Age (min)
-
Age (min) Hardware Addr Type
0
provides an explanation of the command output.
What It Displays...
ARP entry's type of network address.
Network address mapped to the entry's MAC address.
Interval (in minutes) since the entry was entered in the table.
MAC address mapped to the entry's network address.
Encapsulation type used for the entry's network address.
Interface (VLAN or loopback) through which the entry was
learned.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Reviewing and Configuring the ARP Table
0003.4712.7a99
0002.1664.a5b3
00d0.cf00.4b74
Hardware Addr Type
0002.1664.a5b3
0003.4712.7a99 ARPA
IP Configuration Command Set
Type Interface
ARPA Vlan1
ARPA Vlan1
ARPA Vlan2
Interface
ARPA Vlan2
Interface
Vlan2
12-21