Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6.2.2.14
clear spantree porthello
Use this command to reset the hello time for one or more Spanning Tree ports to the default of 2
seconds.
clear spantree porthello port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the hello time to 2 seconds for port fe.1.4:
Matrix(rw)->clear spantree porthello fe.1.4
6-106 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the port(s) for which to reset hello time.