Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6.2.2.2
set spantree portenable
Use this command to set the port status on one or more Spanning Tree ports.
set spantree portenable port-string {enable | disable}
Syntax Description
port-string
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable Spanning Tree port fe.1.12:
Matrix(rw)->
6-94 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the port(s) to enable or disable. For a detailed
description of possible port-string values, refer to
Section
4.1.1.
Enables or disables the Spanning Tree port.
set spantree portenable fe.1.12 enable