4.3.3.1
set port disable
Use this command to administratively disable one or more ports.
set port disable port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable Fast Ethernet port 1 in module1:
Matrix(rw)->set port disable fe.1.1
Specifies the port(s) to disable. For a detailed description
of possible port-string values, refer to
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Configuration Command Set
Disabling / Enabling and Naming Ports
Section
4.1.1.
4-35