5.3.7.1
show snmp notify
Use this command to display the SNMP notify configuration, which determines which
management targets will receive SNMP notifications.
show snmp notify [notify] [volatile | nonvolatile | read-only]
Syntax Description
notify
volatile |
nonvolatile |
read-only
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the SNMP notify information:
Matrix(rw)->show snmp notify
--- SNMP notifyTable information ---
Notify name
Notify Tag
Notify Type
Storage type
Row status
Notify name
Notify Tag
Notify Type
Storage type
Row status
(Optional) Displays notify entries for a specific notify
name.
(Optional) Displays notify entries for a specific storage
type.
If a notify name is not specified, all entries will be displayed.
If volatile, nonvolatile or read-only are not specified, all storage type entries
will be displayed.
= 1
= Console
= trap
= nonVolatile
= active
= 2
= TrapSink
= trap
= nonVolatile
= active
Matrix DFE-Platinum and Diamond Series Configuration Guide
SNMP Configuration Command Set
Configuring SNMP Notification Parameters
5-53