Set Netflow Port - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.8.8

set netflow port

Use this command to enable NetFlow collection on a port.
set netflow port port-string {enable | disable}
Syntax Description
port-string
enable | disable
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to enable NetFlow collection on port ge.1.1
Matrix(rw)->set netflow port ge.1.1 enable
Specify the port or ports on which to enable or disable
NetFlow collection.
Enable or disable NetFlow collection.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
:
Configuring NetFlow
11-163