4.3.2.5
clear port operstatuscause
Use this command to override the causes configured to place operating status to a down or dormant
state for one or more ports.
clear port operstatuscause [port-string] [admin] [linkflap] [flowlimit] [policy]
[cos][all]
Syntax Description
port-string
admin
linkflap
flowlimit
policy
cos
all
Command Defaults
If no options are specified, all operating status causes will be overridden for all
ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to override all operational causes on all ports:
Matrix(rw)->clear port operstatuscause
(Optional) Overrides causes for specific port(s). For a
detailed description of possible port-string values, refer to
Section
4.1.1.
(Optional) Resets adminStatus to up.
(Optional) Overrides link flap violation status.
(Optional) Overrides a flow limiting constraint
(Optional) Overrides a policy restriction.
(Optional) Overrides a Class of Service constraint.
Override all modifiable operStatus down
(Optional)
causes
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Configuration Command Set
Reviewing Port Status
4-33