4.3.1.9
show console bits
Use this command to display the number of bits per character set for one or more console ports.
show console bits [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, the bits per character setting for all console ports will
be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the bits per character setting for console port com.1.1:
Matrix(rw)->show console bits com.1.1
Port
------------
com.1.1
(Optional) Displays the bits per character setting for specific
console port(s).
Bits
--------
8
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Configuration Command Set
Setting Console Port Properties
4-15