Enterasys Matrix 2G4072-52 Configuration Manual page 287

Table 4-1 provides an explanation of the command output.
Table 4-1 show port status Output Details
Output
Port
Alias (truncated)
Oper Status
Admin Status
Speed
Duplex
Type
Matrix DFE-Platinum and Diamond Series Configuration Guide
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
Alias configured for the port. For details on using the set
port alias command, refer to
Operating status (up or down).
Whether the specified port is enabled (up) or disabled
(down). For details on using the set port disable command
to change the default port status of enabled, refer to
Section 4.3.3.1. For details on using the set port enable
command to re-enable ports, refer to
Operational speed in Mbps or Kbps of the specified port.
For details on using the set port speed command to change
defaults, refer to Section
Duplex mode (half or full) of the specified port. For details
on using the set port duplex command to change defaults,
refer to Section 4.3.6.
Physical port and interface type.
Port Configuration Command Set
Reviewing Port Status
Section 4.1.1.
Section 4.3.3.3.
Section
4.3.4.2.
4.3.3.2.
4-27