Clear Port Advertise - Enterasys Matrix 2G4072-52 Configuration Manual

4.3.6.8

clear port advertise

Use this command to reset advertised ability to the default setting on one or more ports.
clear port advertise port-string [10t | 10tfd | 100tx | 100txfd | 1000x | 1000txfd |
1000t | 1000tfd | pause | apause | spause | bpause]
Syntax Description
port-string
10t
10tfd
100tx
100txfd
1000x
1000xfd
1000t
1000tfd
pause
apause
spause
bpause
Specifies port(s) for which advertised ability will be reset.
For a detailed description of possible port-string values,
refer to Section 4.1.1.
(Optional) Clears 10BASE-T half duplex mode from the
port's advertised ability.
(Optional) Clears 10BASE-T full duplex mode from the
port's advertised ability.
(Optional) Clears 100BASE-TX half duplex mode from the
port's advertised ability.
(Optional) Clears 100BASE-TX full duplex mode from the
port's advertised ability.
(Optional) Clears 1000BASE-X, -LX, -SX, -CX half
duplex mode from the port's advertised ability.
(Optional) Clears 1000BASE-X, -LX, -SX, -CX full duplex
mode from the port's advertised ability.
(Optional) Clears 1000BASE-T half duplex mode from the
port's advertised ability.
(Optional) Clears 1000BASE-T full duplex mode from the
port's advertised ability.
(Optional) Clears PAUSE for full-duplex links from the
port's advertised ability.
(Optional) Clears asymmetric PAUSE for full-duplex links
from the port's advertised ability.
(Optional) Clears symmetric PAUSE for full-duplex links
from the port's advertised ability.
(Optional) Clears asymmetric and symmetric PAUSE for
full-duplex links from the port's advertised ability.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
4-61