2.3.2.1
show router
Use this command to display which modules are configured for routing.
show router
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to display which modules are configured for routing:
Matrix(rw)->show router
------------------------------------------------------------
RUNNING
Table 2-10
Table 2-10 show router Output Details
Output
Module
VID
IP Address
Mask
Module
VID
:: 3
100
provides an explanation of the command output.
What It Displays...
Number of the module configured for routing.
VLAN ID of the first (lowest) routing interface.
Module's IP address.
Module's IP mask.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Preparing the Device for Router Mode
Reviewing and Configuring Routing Modules
IP Address
168.192.100.1
Mask
255.255.255.0
2-163