Set Lacp Aadminkey - Enterasys Matrix 2G4072-52 Configuration Manual

4.5.4.5

set lacp aadminkey

Use this command to set the administratively assigned key for one or more aggregator ports. LACP
will use this value to form an oper key. Only underlying physical ports with oper keys matching
those of their aggregators will be allowed to aggregate.
set lacp aadminkey port-string value
Syntax Description
port-string
value
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the LACP admin key to 2000 for LAG port 48:
Matrix(rw)->set lacp aadminkey lag.0.48 2000
Specifies the LAG port(s) on which to assign an admin
key.
Specifies an admin key value to set. Valid values are 0 to
65535.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring LACP
Configuring Link Aggregation
4-105