Enterasys Matrix 2G4072-52 Configuration Manual page 247

mac-phy
poe
link-aggr
max-frame
med-cap
med-pol
med-loc
med-poe
port-string
Matrix DFE-Platinum and Diamond Series Configuration Guide
Link Layer Discovery Protocol and LLDP-MED
MAC-PHY Configuration/Status IEEE 802.3 Extensions
TLV. Value sent includes the operational MAU type,
duplex, and speed of the port.
Power via MDI IEEE 802.3 Extensions TLV. Values sent
include whether pair selection can be controlled on port,
and the power class supplied by the port. Only valid for
PoE-enabled ports.
Link Aggregation IEEE 802.3 Extensions TLV. Values
sent indicate whether the link associated with this port can
be aggregated, whether it is currently aggregated, and if
aggregated, the aggregated port identifier.
Maximum Frame Size IEEE 802.3 Extensions TLV.
Value sent indicates maximum frame size of the port's
MAC and PHY.
LLDP-MED Capabilities TLV.Value sent indicates the
capabilities (whether the device supports location
information, network policy, extended power via MDI)
and Device Type (network connectivity device) of the
sending device.
LLDP-MED Network Policy TLV. Values sent include
application name, VLAN type (tagged or untagged),
VLAN ID, and both Layer 2 and Layer 3 priorities
associated with application, for all applications enabled on
the port. See the set lldp port network-policy
more information.
LLDP-MED Location Identification TLV. Value sent is
the ECS ELIN value configured on the port. See the
lldp port location-info
LLDP-MED Extended Power via MDI TLV. Values sent
include the Power Limit (total power the port is capable of
sourcing over a maximum length cable) and the power
priority configured on the port. Only valid for
PoE-enabled ports.
Specifies the port or range of ports to be affected.
Discovery Protocols Command Set
command for more information.
command for
set
3-51