2.2.5.2
set inlinepower mode
Use this command to set the chassis power allocation mode.
set inlinepower mode {auto | manual}
Syntax Description
auto
manual
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the chassis power allocation mode to manual:
Matrix(rw)->set inlinepower mode manual
Assigns automatic mode to chassis power allocation.
Assigns manual mode to chassis power allocation. This setting
allows the values configured with the set inlinepower assigned
command
(Section
2.2.5.8) to be applied to PoE modules.
Matrix DFE-Platinum and Diamond Series Configuration Guide
General Configuration Command Set
Configuring Power over Ethernet (PoE)
2-99