Show Spantree Maxhops - Enterasys Matrix 2G4072-52 Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.51

show spantree maxhops

Use this command to display the Spanning Tree maximum hop count.
show spantree maxhops
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Spanning Tree maximum hop count:
Matrix(rw)->show spantree maxhops
Bridge Max Hop count is set to 20
6-64 Matrix DFE-Platinum and Diamond Series Configuration Guide