Show Port Mirroring - Enterasys Matrix 2G4072-52 Configuration Manual

4.4.4.1

show port mirroring

Use this command to display the source and target ports for mirroring, and whether mirroring is
currently enabled or disabled for those ports.
show port mirroring
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display port mirroring information. In this case, fe.1.4 is configured as
a source port and fe.1.11 is a target, but mirroring is not currently enabled between the ports:
Matrix(rw)->show port mirroring
Port Mirroring
==============
Source Port = fe.1.4
Target Port = fe.1.11
Frames Mirrored = Rx and Tx
Port Mirroring status disabled.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring Port Mirroring
Setting Port Mirroring
4-91