Set Length - Enterasys Matrix 2G4072-52 Configuration Manual

General Configuration Command Set
Setting Basic Device Properties
2.2.3.30

set length

Use this command to set the number of lines the CLI will display.
set length screenlength
Syntax Description
screenlength
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the terminal length to 50:
Matrix(rw)->set length 50
2-80 Matrix DFE-Platinum and Diamond Series Configuration Guide
Sets the number of lines in the CLI display. Valid values
are 0, which disables the scrolling screen feature described
in Section 2.1.6.8, and from 5 to 512.