Show Movedaddrtrap - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.5.16 show movedaddrtrap

Use this command to display the status of moved MAC address traps on one or more ports.
show movedaddrtrap [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, MAC address traps for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display the status of MAC address traps on ge.1.1 through 3:
Matrix(rw)->
Moved Address Traps Globally enabled
Port
--------- ------------
ge.1.1
ge.1.2
ge.1.3
(Optional) Displays MAC address traps for specific port(s).
For a detailed description of possible port-string values,
refer to Section
show movedaddrtrap ge.1.1-3
Enable State
enabled
enabled
enabled
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
4.1.1.
11-119