Show Spantree Autoedge - Enterasys Matrix 2G4072-52 Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.39

show spantree autoedge

Use this command to display the status of automatic edge port detection.
show spantree autoedge
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the automatic edge port detection function:
Matrix(rw)->
autoEdge is currently enabled.
6-52 Matrix DFE-Platinum and Diamond Series Configuration Guide
show spantree autoedge