Show Ip Pim Interface - Enterasys Matrix 2G4072-52 Configuration Manual

IP Configuration Command Set
Configuring PIM
12.2.7.7

show ip pim interface

Use this command to display information about PIM interfaces that are currently up (not shutdown).
show ip pim interface [interface]
Syntax Description
interface
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router1#
Command Defaults
If not specified, information about all PIM interfaces will be displayed.
Example
This example shows how to display PIM interface information
Matrix>Router1#show ip pim interface
Address
------------------------------------------------------------------------------
35.0.0.1
23.0.0.1
20.0.0.2
10.0.0.1
Table 12-5
Table 12-5 show ip pim interface Output Details
Output
Address
Vlan
Ver/Mode
12-58 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays information about a specific PIM
interface. This interface must be enabled with PIM as
described in
Vlan Ver/Mode Nbr-Count Query-Intvl DR-Prior
35 v2/S
23 v2/S
20 v2/S
10 v2/S
provides an explanation of the command output.
What It Displays...
IP address of the PIM interface.
VLAN ID of the PIM interface.
Version and mode (sparse or dense) of PIM running on the
interface.
Section 12.2.7.1.
1 30
0 30
0 30
2 30
DR
1 35.0.0.2
1 23.0.0.1
1 20.0.0.2
87 10.0.0.1