Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6.2.2.8
show spantree portstate
Use this command to display the state (blocking, forwarding, etc.) for a port on one or more
Spanning Trees.
show spantree portstate [port port-string] [sid sid]
Syntax Description
port port-string
sid sid
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the Spanning Tree state for fe.1.7:
Matrix(rw)->
Port fe.1.7 has a Port State of Forwarding on SID 0
6-100 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays the Spanning Tree state for specific
Spanning Tree port(s). For a detailed description of
possible port-string values, refer to
(Optional) Displays the state for a specific Spanning Tree
identifier. Valid values are 0 - 4094. If not specified, SID
0 is assumed.
If port-string is not specified, current state will be displayed for all Spanning
Tree ports.
If sid is not specified, current port state will be displayed for Spanning Tree 0.
show spantree portstate port fe.1.7
Section
4.1.1.