Port Configuration Command Set
Setting Console Port Properties
4.3.1.16
set console parity
Use this command to set the parity type for one or more console ports.
set console parity {none | odd | even | mark | space} [port-string]
Syntax Description
none
odd
even
mark
space
port-string
Command Defaults
If port-string is not specified, parity type will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable even parity checking on console port com.1.1:
Matrix(rw)->set console parity even com.1.1
4-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies that no parity checking will be performed.
Enables odd parity checking.
Enables even parity checking.
Enables mark parity checking.
Enables space parity checking.
(Optional) Sets parity type for specific console port(s).