Clear Spantree Newroottrapenable - Enterasys Matrix 2G4072-52 Configuration Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.73

clear spantree newroottrapenable

Use this command to reset the Spanning Tree new root trap function back to the default state of
enabled.
clear spantree newroottrapenable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the new root trap function to enabled:
Matrix(rw)->clear spantree newroottrapenable
6-86 Matrix DFE-Platinum and Diamond Series Configuration Guide