Enterasys Matrix 2G4072-52 Configuration Manual page 601

Example
This example shows how to display information for VLAN 1. In this case, VLAN 1 is named
"DEFAULT VLAN" and it is enabled to operate. Ports allowed to transmit frames belonging to
VLAN 1 are listed as egress ports. Ports that won't include a VLAN tag in their transmitted frames
are listed as untagged ports. There are no forbidden ports (prevented from transmitted frames) on
VLAN 1:
Matrix(rw)->show vlan 1
VLAN: 1
VLAN Type: Permanent
Creation Time: 4 days 9 hours 4 minutes 50 seconds ago
Egress Ports
host.0.1, fe.1.1-10, ge.2.1-4, fe.3.1-7, lag.0.1-32
Forbidden Egress Ports
None.
Untagged Ports
host.0.1, fe.1.1-10, ge.2.1-4, fe.3.1-7, lag.0.1-32
Table 7-1
Table 7-1 show vlan Output Details
Output
VLAN
NAME
Status
VLAN Type
FID
Creation Time
Egress Ports
Forbidden Egress
Ports
Untagged Ports
NAME: DEFAULT VLAN
FID: 1
provides an explanation of the command output.
What It Displays...
VLAN ID.
Name assigned to the VLAN.
Whether it is enabled or disabled.
Whether it is permanent (static) or dynamic.
Filter Database ID of which this VLAN is a member.
Time elapsed since the VLAN was created.
Ports configured to transmit frames for this VLAN.
Ports prevented from transmitted frames for this VLAN.
Ports configured to transmit untagged frames for this VLAN.
Matrix DFE-Platinum and Diamond Series Configuration Guide
VLAN Configuration Command Set
Reviewing Existing VLANs
Status: Enabled
7-5