Show Smon Vlan - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.3.4

show smon vlan

Use this command to display SMON (Switched Network Monitoring) VLAN statistics.
show smon vlan [port-string] [vlan vlan-id]
Syntax Description
port-string
vlan vlan-id
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SMON VLAN 1 statistics for 1-Gigabit Ethernet port 14 in
module 3:
Matrix(rw)->
Show VLAN Statistics
--------------------
Interface = ge.3.14
Owner
Creation
Status
--------------------
VLAN 1
Total
Overflow
NonUnicast
NonUnicast Overflow
(Optional) Displays SMON VLAN statistics being
collected by specific port(s). For a detailed description of
possible port-string values, refer to
(Optional) Displays SMON statistics associated with a
specific VLAN.
If port-string is not specified, SMON statistics for all ports will be displayed.
If vlan-id is not specified, statistics for all VLANs will be displayed.
show smon vlan ge.3.14 vlan 1
= none
= 0 days 16 hours 4 minutes 34 seconds
= enabled
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Packets
8011072
0
0
0
Configuring SMON
Section 4.1.1.
Octets
2070785503
0
0
0
11-41