Show Port Priority - Enterasys Matrix 2G4072-52 Configuration Manual

9.3.1.1

show port priority

Use this command to display the 802.1D priority for one or more ports.
show port priority [port-string]
Syntax Description
port-string
Command Defaults
If port-string is not specified, priority for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the port priority for the fe.2.1 through 5;
Matrix(rw)->show port priority fe.2.1-5
fe.2.1 is set to 0
fe.2.2 is set to 0
fe.2.3 is set to 0
fe.2.4 is set to 0
fe.2.5 is set to 0
Port Priority and Rate Limiting Configuration Command Set
(Optional) Displays priority information for a specific port.
For a detailed description of possible port-string values,
refer to Section 4.1.1.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring Port Priority
9-3